NACH OBEN

Dr.-Ing. Maximilian Paßmann

Lebenslauf

Arbeits- und Forschungsschwerpunkte
  • Laborleitung
  • Neu- und Weiterentwicklung von Strömungsmesstechnik
          o pneumatische Mehrlochsonden
          o optische Messtechnik (Schatten-, Schlierenfotografie, PIV)
  • Experimentelle Untersuchung von Schaufel-Spaltströmungen in Strömungsmaschinen
Lehre
  • Gasdynamik
  • Betreuung von Semester- und Abschlussarbeiten
Publikationen

Passmann, M., aus der Wiesche, S., Povey, T., and Bergmann, D. (March 18, 2021). "Effect of Reynolds Number on Five-Hole Probe Performance: Experimental Study of the Open-Access Oxford Probe." ASME. J. Turbomach. 2021. DOI: 10.1115/1.4050597.

Passmann, M., aus der Wiesche, S., and Joos, F. (February 8, 2021). "Numerical Calibration of Three-Dimensional Printed Five-Hole Probes for the Transonic Flow Regime." ASME. J. Fluids Eng. May 2021; 143(5): 051501. DOI: 10.1115/1.4049680.

Passmann, M., aus der Wiesche, S., and Joos, F. “Focusing Schlieren Visualization of Transonic Turbine Tip-Leakage Flows” Int. J. Turbomach. Propuls. Power 2020. DOI: 10.3390/ijtpp5010001.

Reinker, F., Kenig, E.Y., Passmann, M., and aus der Wiesche, S. “Closed Loop Organic Wind Tunnel (CLOWT): Design, Components and Control System.” Energy Procedia 129 (2017): 200-207. DOI: 10.1016/j.egypro.2017.09.158.

Passmann, M., aus der Wiesche, S., and Joos, F. "A one-dimensional analytical calculation method for obtaining normal shock losses in supersonic real gas flows." Journal of Physics: Conference Series. Vol. 821. No. 1. IOP Publishing, 2017. DOI: 10.1088/1742-6596/821/1/012004.

Vorträge

Aus der Wiesche, S., Sundermeier, S., Passmann, M.and Kenig, E.Y. (2021). Flow in pillow plate channels for high-speed turbomachinery heat exchangers Proc. 14th European Conference on Turbomachinery Fluid Dynamics & Thermodynamics (ETC14), Paper-ID: ETC2021-514, Gdansk, Poland, April 12-16, 2021

Reinker F., Wagner R., Passmann M., Hake L., aus der Wiesche S. (2021) Performance of a Rotatable Cylinder Pitot Probe in High Subsonic Non-ideal Gas Flows. In: Pini M., De Servi C., Spinelli A., di Mare F., Guardone A. (eds) Proceedings of the 3rd International Seminar on Non-Ideal Compressible Fluid Dynamics for Propulsion and Power. NICFD 2020. ERCOFTAC Series, vol 28. Springer, Cham. DOI: 10.1007/978-3-030-69306-0_15.

Passmann, M., aus der Wiesche, S., Povey, T., and Bergmann, D. “Effect of Reynolds Number on Five-Hole Probe Performance: Experimental Study of the Open-Access Oxford Probe”, ASME Turbo Expo 2020. DOI: 10.1115/GT2020-16074.

Passmann, M., aus der Wiesche, S., and Kenig, E.Y. “On the Low and High Speed Flow of Gases through Pillow-Plate Channels” In Proceedings of ASME 2019 AJK Fluids, ASME – JSME – KSME Joint Fluids Engineering Conference, Juli 28-August 1, 2019; San Francisco, USA. DOI: 10.1115/AJKFluids2019-4933.

Passmann, M., aus der Wiesche, S., and Joos, F. “Numerical Calibration of 3D Printed Five-Hole Probes for the Transonic Flow Regime” In Proceedings of ASME 2019 AJK Fluids, ASME – JSME – KSME Joint Fluids Engineering Conference, Juli 28-August 1, 2019; San Francisco, USA. DOI: 10.1115/AJKFluids2019-4706.

Passmann, M., aus der Wiesche, S., and Joos, F. “Focusing Schlieren Visualization of Transonic Turbine Tip-Leakage Flows” In Proceedings of 13th European Conference on Turbomachinery Fluid dynamics & Thermodynamics ETC13, April 8-12, 2019; Lausanne, Switzerland.

aus der Wiesche, S., and Passmann, M. “Analysis of Steam Turbine Blade Tip Excitation Forces by Means of Computational Fluid Dynamics and Experimental Cascade Results.” In ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2018. DOI: 10.1115/GT2018-75179.

Passmann, M., aus der Wiesche, S., Joos, F., and Willinger, R. “The Physical Mechanism of Tip Leakage Loss Reduction by Means of Passive Injection in Low Mach Number Flows.” In ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2018. DOI: 10.1115/GT2018-76336.

Passmann, M., aus der Wiesche, S., and Joos, F. “An Experimental and Numerical Study of Tip-Leakage Flows in an Idealized Turbine Tip Gap at High Mach Numbers.” In ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2018. DOI: 10.1115/GT2018-76366.

Passmann, M., and aus der Wiesche, S.. “Development and commissioning of a supersonic blow down wind tunnel for educational purposes.” In ASME 2017 Fluids Engineering Division Summer Meeting, American Society of Mechanical Engineers, 2017. DOI: 10.1115/FEDSM2017-69196.

Passmann, M., and aus der Wiesche, S. “A detailed experimental and numerical investigation of flow structures in a turbine tip gap with passive injection.” In ASME 2017 Fluids Engineering Division Summer Meeting, American Society of Mechanical Engineers, 2017. DOI: 10.1115/FEDSM2017-69195.

Passmann, M., Hasselmann, K., and aus der Wiesche, S. "Measurements and Visualization of the Flow in a Turbine Blade Tip Gap With Passive Jet Injection." ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. DOI: 10.1115/IMECE2016-65182.

Rejek, J., Passmann, M., Hasselmann, K., Reinker, F., aus der Wiesche, S., Mazor, L., & Willinger, R. Profile and Mixing Losses of a Turbine Cascade Under the Condition of Low Reynolds Number Flows. In ASME 2016 Fluids Engineering Division Summer Meeting collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers. DOI: 10.1115/FEDSM2016-7568.

Passmann, M., Reinker, F., Hasselmann, K., aus der Wiesche, S., and Joos, F. "Development and Design of a Two-Stage Contraction Zone and Test Section of an Organic Rankine Cycle Wind Tunnel." ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2016. DOI: 10.1115/GT2016-56580.

aus der Wiesche, S., Passmann, M., and Willinger, R.. "Reduction of Turbine Blade Tip Leakage Losses and Excitation Forces by Passive Tip Injection." ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2015. DOI: 10.1115/IMECE2015-50120.


Dr.-Ing. Maximilian Paßmann

Ruhr-Universität Bochum
Raum IC 3 / 81
Universitätsstraße 150
44801 Bochum

Telefon +49 (0) 234 / 32-28410
E-Mail: Maximilian.Passmann@ruhr-uni-bochum.de